How To Disable Headphone Security On An iPhone

If you own an iPhone and use headphones to listen to music, you have likely gotten a Headphone Safety notification.

The iPhone’s Headphone Safety function alerts users and automatically lowers the level if they have been exposed to excessively loud sound for an extended period of time. This function is meant to prevent hearing loss from continuous exposure to loud sounds.

Although you may adjust the volume again, the Headphone Safety function can be difficult and frustrating, particularly when using Bluetooth speakers instead of headphones to listen to music.

You can disable Headphone Safety if it has been automatically decreasing your sound levels. Here is the procedure.

How to Safely Turn Off Headphones

If you routinely listen to loud music while wearing headphones, we do not suggest deactivating Headphone Safety on your iPhone. What is Safety for Headphones? Listening to loud music for an extended period of time might cause hearing loss over time. Instead of turning off headphone notifications, use the Reduce Loud Sounds function to increase the decibel level. This function allows you to change the default decibel level of your headphones, which is 85 dB.

Apple suggests that if you utilize external Bluetooth speakers, you set the device type to “Speaker.” Both options enable you to listen to music at louder volumes without disabling the Headphone Safety function.

If you would still like to disable Headphone Safety, there are two ways to disable the iPhone volume warning. Follow the instructions below:

  1. Open the Settings menu.
  2. Tap Sounds and Haptic Feedback
  3. Then, select Headphone Safety.
  4. Turn off Headphone Notifications.

or

  1. Open the Settings menu.
  2. Select Accessibility
  3. Navigate to the Hearing section and select Audio/Visual.
  4. Turn off Headphone Notifications.

How to Disable Headphone Security on a Locked iPhone

In certain nations and areas, the Headphone Safety notice feature cannot be disabled. Moreover, only unlocked iPhones will see the toggle to disable headphone notifications. There is, however, a modest workaround.

If you cannot disable Bluetooth devices in your country or region, you can change the kind of Bluetooth device. Changing the device type from “Headphone” to “Other” will prevent headphone notifications and automatic volume reduction.

Changing the Bluetooth Device Type

  1. From the home screen, navigate to Settings.
  2. Select Bluetooth.
  3. Click the “I” Information icon next to the desired device.
  4. Select Device Type
  5. Select the device from the drop-down menu. Here are your alternatives:
  • Autoradio • Headphones
  • Hearing Instrument • Speaker Other

If you ever need to change the device type again, repeat the steps outlined above.

Seemore:

How to Enable/Disable iPhone’s Reduce Loud Sounds

Instead of disabling Headphone Safety, you can enable or disable Reduce Loud Sounds. When enabled, this feature allows you to define a decibel maximum. This value represents the comparison between decibels. You can limit decibels to the volume level of a vacuum cleaner on the low end and an ambulance siren on the high end. Enabling these settings may decrease the amount of Headphone Safety alerts you receive.

  1. Open the Settings menu.
  2. Tap Sounds and Haptic Feedback
  3. Then, select Headphone Safety.
  4. Swipe the Reduce Loud Sounds button to turn it on or off.

What is Safe Headphone Use?

Listening to headphones at too high a volume for too long might cause hearing loss. Headphone Safety is an iPhone headphone notification function that safeguards your hearing. If you have exceeded the recommended 7-day audio exposure limit, you will receive a message instructing you to lower the level.

After receiving the warning, the next time you put in your headphones or connect them over Bluetooth, the level will be automatically decreased. The exposure limitation only applies to audio. Calls do not contribute to your headphone audio exposure. If your iPhone is silencing incoming calls, please read on for a solution.

How To Prevent iPhone From Muting Calls

Numerous iPhone users report that incoming calls are muted and routed directly to voicemail. If you are certain that Do Not Disturb is not activated, there are several options you can try.

First, ensure that neither Call Forwarding nor Silence Unknown Callers is active and that both options are disabled. Both can be found here:

  • Visit Settings
  • Tap Phone.
  • Scroll down to deactivate Call Forwarding.
  • Scroll down and deactivate the Silence Unknown Callers option.

When Silence Unknown Callers is on, calls from unknown numbers, such as telemarketers and scammers, are sent to voicemail. If you believe you may receive valid calls from unknown numbers, you should probably disable this option.

If that does not resolve the issue, examine the Screen Time setting.

  • In Settings, tap Screen Time. • Tap Communication Limits. • If prompted, enter the passcode.
  • Everyone should be selected for both During Screen Time and During Downtime.

It is possible to restrict some phone calls during Screen Time and Downtime if Screen Time is enabled. To avoid missing any calls, you should set both to everyone.

Obviously, the most apparent place to check if you’re still having problems is Do Not Disturb. You should turn this off. Additionally, it is important to ensure that your volume is not set to zero.




Leave a Reply

Your email address will not be published.