where i find my love

Just another WordPress site

This content shows Simple View

How To Connect Unsupported Bluetooth To Ps4? Top 3 Ways In 2022

We’re going to tell you how to connect a Bluetooth device that PS4 doesn’t support. After the PlayStation 4 came out, Sony said that it doesn’t support A2DP or any Bluetooth profile for audio streaming. This means that it doesn’t work with Bluetooth devices. Advanced Audio Distribution Profile, or A2DP, is a stereo music profile that can be sent over Bluetooth wirelessly.

The PS4 doesn’t work with Bluetooth audio devices. Why did Sony stop making Bluetooth devices for the PS4? The reason is that A2DP will be behind by 100–200ms, which would make things even stranger when using these devices. So most Bluetooth devices won’t work with the PS4. There is a way around this, though. Use one of the following ways to connect Bluetooth devices to your PS4 and play games.

how to connect Bluetooth headphones to ps4?

Use a USB dongle to connect a Bluetooth headset,

The PlayStation 4 is a great game system, but it is missing a few features. One of them is using any Bluetooth headset. You can only use a few official and licensed ones. The PS4 Bluetooth headset dongle is a piece of hardware that can solve this problem.

The FreeMe is easy to use. You get a USB dongle that plugs into the PS4 and a 3.5mm microphone that plugs into your controller. It’s plug-and-play, so you don’t need any special software. Once you’ve put the dongle in, pair your Bluetooth headset with it as you normally would, and you’re good to go. You can choose to send game sounds to the headset and to other players in a multiplayer game or group chat.

The 3.5mm microphone is a miracle. Its sensitivity is so good that it can pick up your voice even when your face isn’t close to the controller. Just play as you normally would. In the settings menu of your PlayStation 4, you can change the microphone volume to fit your voice and the environment.

The dongle and microphone are small and light, so once they are set up, you won’t even notice they are there. The small size also makes them easy to carry and makes sure they won’t get in the way when you’re playing with your favorite Bluetooth headphones.

  • Connect the Bluetooth adapter dongle to your PS4’s USB port.
  • Wait for the plug to quickly flash blue. It shows the mode for pairing.
  • Please turn on and put your Bluetooth headset in pairing mode.
  • The solid blue light on the dongle shows that your Bluetooth headset is now paired with your PS4.
  • Now, plug the microphone into your controller’s 3.5mm port.
  • Your PS4 will now show a message saying that this connection has been made.
  • Your Bluetooth headset is now fully connected, so you can talk and listen to music at the same time.


Connect an unsupported Bluetooth device to a PS4 using a wired connection.

If the first way doesn’t work, you’ll have to use wired media instead of Bluetooth to connect your headphones. You would be wrong to think that Sony hasn’t even made a way for you to connect your Bluetooth headphones. The audio jack on your PS4 controller can be used to connect any headset so that voice can be sent to it.

You would need a headphone jack, which your Bluetooth headphones might have come with. If not, you can quickly buy one from Amazon for a few dollars.

Connect your headset and PS4 controller to the audio jack on the controller. Make sure the controller is set up right.

Now, go to Settings, then Devices, then Audio devices. 2-21

Now, go to Output Device and make sure Headphones connected to a controller is selected. You can change the volume by using the volume control (headphone) in the bottom right corner. You can also change the settings of the input device if your headset has a microphone. 3-19

We need to change the Output to Headphones setting so that not only the chat volume but also the game volume is sent to your headphones. Make sure that “All Audio” is chosen. 4-17

Save the changes and leave settings. Now, use your headphones to see if you can hear the sound well.

how to hook up bluetooth headphones to ps4?

Bluetooth Devices That Can Connect to PS4

If your Bluetooth device is supported by Sony, you can set up the settings to pair it right away. If you don’t know if Sony supports it or not, you can look at the headset to find out. But making changes to the settings is never dangerous.

To connect, turn on your Bluetooth headset and put it into pairing mode.

Go to Settings>Peripherals>Bluetooth Devices on your PS4.

To connect, choose the name of your headset.

If the connection works, you can now try using your Bluetooth headset to play games.

If, for some reason, it doesn’t work, the following message will show up: The PS4 doesn’t work with Bluetooth audio devices. If you can’t connect to the Bluetooth device within the time limit, you can try one of the following.

It’s simple, right? What do you do to help? If you still have questions, feel free to leave a comment below, and we’ll see what else we can do to help.


How to ice skate beginner?

What is Skating?

You can learn how to ice skate at almost any age. It’s a good way to get some aerobic exercise and can help you improve your balance and coordination. Over time, your leg muscles will get stronger, your joints will get more flexible, and you’ll be able to do more.
When someone says, “I’m going skating,” they may not mean ice skating but rather electric skateboarding or just street skating. They could also be going roller skating. In the end, it depends on the situation. Skating means gliding around in whatever way the person does it.
Besides being good for your health, ice skating is fun. You don’t need anything but a place to skate and the desire to try something new. Wear warm, light clothes that don’t get in the way of your movement. A helmet isn’t required, but if you’re afraid of falling, a hockey or snowboarding helmet can give you some extra protection (and confidence).
You don’t have to buy your own ice skates to learn how to skate. You can rent them for a small fee at any public rink. But having your own skates gives you a performance boost and a better fit, which helps you get better at skating.

Let’s Start

1. Skate Forward
We need to move forward. Take one step forward with your toes facing the direction you want to go. Then do the same thing with your other foot. Afraid? Start by holding on to the wall while you build up your courage. Oh, and don’t look down to see if you’re doing it right, or you’ll hurt yourself by running into someone. Next, try to push a little harder by doing two-foot glides. As your confidence grows, you’ll do longer glides faster.
2. Backward Skating
Keep your feet in line with each other, bend your knees, and lift your chest. Then, move your weight somewhere between your feet and push outward, one foot at a time. Work off the balls of your feet and gently push backward to keep your balance. Don’t have any plans? No worries. Try walking slowly backward with your toes turned in. As you do this, move your weight around until you find the spot where you can almost stand on your own.
3. Forward
Start this move by standing in a V shape with your heels touching and your toes pointing out. You should, of course, bend your knees a bit. Now, push out and forward with the inside edges of your skates. Keep going until the distance between your blades is one foot.
At that point, with your knees straight, bring your toes together to make an upside-down V shape. When you finish this move, you’ll have done a circular move, like the letter O.
4. Backward
Backward swizzles are harder for many people than forward swizzles. You might have found it easy to do forward wiggles, but you might find it hard to do backward swizzles.
Backward swizzles are basically the same as their forward counterparts. Except that you’re going backwards in this case.
For backward swizzles, you start the glide in an upside-down V. So, crouch down. And you should keep your toes together. Next, press your heels outward with your inside edges. Then, your skates should start to move apart. Keep moving until the space between your feet is about one foot.
5. Glide on One Foot (Forward)
Start with forward marching or swizzles, whichever you like better. Then, start gliding for two feet. Next, lift one of your feet and put it close to and parallel to the foot you’re using to skate.
Remember to keep the hip on the foot you’re not dancing on a little higher. At the same time, put your arms out in front of you, parallel to the ice and in the direction you want to go.
6. Learn how to “dip”
Start by stretching your arms out to the sides, one to the right and one to the left. Then, start slowly marching to build up speed. Last, start a 2-foot glide by pushing off. Next, do a dip with both knees. At the same time, you should have your arms out in front of you, parallel to the ice, and over your knees. Your head and upper body should stay straight up.
7. Crossovers

Crossovers are something you should do often. They are a basic move, and even though they can be hard for a beginner, you won’t get very far without learning them.
• Crossovers to the front
Here’s how to do forward crossovers. First, stand with your feet side by side and one arm in front of you and the other behind you. Then, try crossing your right foot over your left foot as you try to find your balance.
Next, lift your left leg and put it next to your right leg. This will put you back where you started. Follow one of the hockey lines to make sure you’re going in the right direction. And as you do all of this, make sure you don’t turn your hip. If you do, you’ll walk in a different direction.
You can also try doing sidesteps with one arm behind you and the other in front of you. When you do that, you’ll feel like your hips and shoulders are twisting. Your shoulders and hips won’t be in a square shape.
Next, learn the edges you’ll need to do the forward crossovers. As you cross your right leg over your left, bend your left knee a little and drop it toward your smallest toe. When you do that, you can easily cross over your left leg. It also keeps the toes from getting in the way later.
And when you put your right foot down, slightly bend your ankle and step on the outside edge. Lastly, move the left foot so that it is next to the right foot.

• Backward Crossovers
You should be able to skate backwards and do backward swizzles and wiggles now (hopefully).
Now, start with wiggles or swizzles that go backward. Then, lift one foot, find your balance, and glide in that position. Then, do the wiggles or swizzles backward again and lift the other foot up. Now, go to the hockey circle (there are usually many such circles in an indoor ice rink).
Next, glide around the circle backwards one foot at a time until you can do it smoothly. Note: Turn your head over your shoulder so that you can see where you’re going. People often make the mistake of facing the direction they are gliding from because they think that is the best way to avoid hitting things. Doesn’t that sound silly? But that’s what beginners do all the time.
Use the inside backward edge and the foot outside the circle to push. Then, lift the foot you used to push and cross it over the other foot. Then, pick up the skating foot and put it next to the other foot, just like you did for forward crossovers.
When you do a crossover, remember to bend your knees so you can move smoothly and not fall. One arm should reach forward, and the other should reach back. This will help you stay balanced. Once you’re used to going in one direction, start practicing going the other way.

8. Jumps
Jumps in ice skating involve getting off the ice and spinning in the air. You’ll learn six different types of rotational jumps (eventually).
The easiest jump is the salchow, and the next easiest is the toe loop. Then there are jumps like the loop, the flip, and the lutz. The last jump is the axel jump, which is the hardest of them all.
Even though I said the salchow was the easiest, ALL of these jumps are hard for a beginner to learn. And it’s easy to hurt yourself. So, I really think you should work with a professional trainer.
Some people can do a salchow jump after practicing for a month or two. Some people need two years or more to learn the same jump. Not everyone in class understands what the teacher says the first time. When it comes to ice skating, there will always be differences in how fast people learn.
There’s intelligence in the classroom, and then there’s intelligence in the real world. To become a professional skater, you have to keep improving your kinesthetic intelligence and be passionate about it.
Learn to hop before you try these six jumps. A hop is a simple jump in which you jump straight up without turning around. Once you know how to do that, you can try these 6 ice skating jumps, which go from easy to hard.

Final Thought

You know the basics of how to skate on ice. Now, all that’s left is to get over your fear of falling. Get on your skates and go out there. At first, it will be hard and very slow. You might fall a few times, but don’t give up. You’ll soon be able to jump, spin, glide, and glide with ease, and everyone will be amazed. Here’s the thing: hurry up and grab those skates. Happy skating!

What is FreeSync Brightness Flickering, and How Do I Fix It?

To be a computer enthusiast, you do need a high-end, innovative screen that shows off the innovation inside. Also, if you know how it works, you won’t have to worry about as many things, so you can solve your own problems.

And if you like to play games, it makes sense to have a FreeSync screen. And these days, there are a lot of screens with the best and most flexible features that make it easier to watch screen time.

Also, it’s pretty common to see the brightness flicker in some games. However, this isn’t the case with all games. You might not see flickering even when you’re playing fast-paced competitive games with a certain refresh rate.

But that can be hard to do when the brightness of your FreeSync screen keeps flickering. That certain thing changes the whole gaming experience and the way you watch it. Let’s look at the solution you can try if you care about this.

Brightness Flickering on FreeSync

If you have a high-tech VA (vertical alignment) LCD display with FreeSync, the brightness flickering problem is likely to happen. But IPS and TN panels also have flickering brightness, though not as much as VA panels. It’s a pretty common problem, especially with the VA panel, but it can also happen with other screens that have FreeSync.

FreeSync brightness flickering won’t happen every time you use your computer or every time you play a game. Rather, it depends on the game you are playing, and even then, it depends on a number of factors. You also only see the screen flickering in one unit of the display monitor, while the rest are fine.

For example, it can get worse to the point where the screen starts flickering out of control, and in some games, the brightness will only flicker while the game is loading. On the other hand, you never have this problem, even if you use the VA penalty with FreeSync!

Stopping the flickering of the FreeSync brightness

The best and maybe easiest way to fix flickering brightness would be to turn down the picture settings. This will keep the rate of updating in check. Also, updating the firmware would be a good way to fix the problem. You can also stop flickering by turning off FreeSync, but the solution is also there. Samsung is now aware of this problem and has fixed it by adding the VRR (variable refresh rate) option through a firmware update.

Also, keep in mind that the refresh rate of some display panels can change quickly and randomly to a high point, say 144Hz, which definitely affects the screen and causes flickering in some way. So, it turns out that VRR in the control range is a solution. If you see such problems on the screen, you can choose to do that. So, the only way to update the firmware is through the manufacturer.

How to stop the brightness on FreeSync from flickering?

First of all, if something bothers you in the display settings, the answer is probably also in the settings! The low frame rate compensation will be turned on or encouraged by a screen with a refresh rate that changes from 48 to 144Hz all the time (LFC). This will happen when the frame rate drops to 47FPS or less. Most AMD graphics cards can use it.

We all know that FreeSync is the best way to reduce or get rid of screen tearing, so LFC doubles the frame rate to keep the screen tearing. So, the best thing to do is lower the picture setting. If the display you’re using right now has 48 FPS, or frames per second, it will affect the LCF and keep its rate high and low or on and off, which causes the brightness to flicker. But lowering the picture setting is a better choice and the solution to this problem.

You can also use Custom Resolution Utility (CRU) to improve VRR (variable refresh rate). Using the CRU tool to make the FreeSync range as small as possible makes a difference.


Why does the brightness go up and down?

When the screen flickers and moves, it makes it hard to see perfectly. On top of that, this thing is unbearable if you are playing games or working on a graphics animation. But if you know the exact cause, you can better understand the root cause, which means that your approach to finding a solution is more likely to work.

With FreeSync technology, the brightness flickers because the display you are using is set to a higher brightness at the refresh rate. This is because the refresh rate and the brightness of the display are not in sync.

For example, if the display screen’s FPS is set to 48fps and stays that way, it will cause the LFC to change, which makes the brightness flicker.

How can I fix the flickering FreeSync?

There are two main things that cause the brightness to flicker: LFC and FPS. When FreeSync is on, the brightness flickers in more than one game. But if you want to fix this problem, the first thing you should do is slow down the refresh rate and keep it in sync with the FPS. If you keep the FPS between 60 and 165, it can be a good result. You can also try turning off the AMD External Events Utility and then restarting the system.

Besides that, you can fix it by taking a few easy steps. First, go to the AMD Radeon settings, click on display, and toggle the virtual resolution or GPU scaling on or off. Once you’re done, you’ll notice that the brightness will stop flickering in a very big way. It’s the real deal and it works pretty well, too!

How do I stop the screen in Windows 10 from flickering?

Aside from games, a flickering monitor screen makes it hard to work and gives a bad impression to the eyes. You can’t do your work well if the screen keeps flickering. Most of the time, it happens when the divers don’t update or when something goes wrong. Also, if your Windows drivers aren’t compatible, you will probably have the same problem. Make sure that the drivers are up to date and that the software and Windows are compatible.

What is the best way to fix flickering in G-sync?

If your monitor has G-sync technology and the screen shakes or flickers, it’s because the frames per second (FPS) is too low. It’s pretty clear that the screen will flash when the frames per second go over the FreeSync range. So, increasing the lower frequency will make sure that the problem is solved.

What will happen if I keep using the screen that flickers?

The eyes can’t see well through a display screen that flickers, changes in brightness, or shows a bad picture. Also, you can’t pay attention to the screen and the work you want to do to make sure you have the right angle. No matter how well you do your work, if the display is not in good shape, it will continue to bother you and your eyes.

If you’re using a FreeSync monitor and the brightness keeps going up and down, that could lead to a number of problems. You will have to move your pupil faster than usual, which will make your eyes feel uncomfortable. Overall, your eyes will get tired if you keep using a screen with flickering brightness or a display.

To play the fun and exciting game, the flickering brightness needs to be fixed, and the overall performance needs to be in check.

One Last Thing

It’s not strange to run into problems when you have a computer. We’ve all had things go wrong at some point. But the important thing is to know the right answer.

We’ve talked about the brightness flickering in FreeSync today. You know that the FPS and refresh rate have to stay within a certain range, but you can easily make changes to see if the flickering stops.

Also, brightness flickering happens in different ways. Sometimes it only happens when the game is loading, sometimes it only happens in one part of the screen, and sometimes the brightness of the whole screen starts to change. You can see changes and have the best gaming time by using the CRU tool or lowering the picture setting.



The beginning

Legend of Zelda: Breath of the Wild and Super Mario Odyssey are two of the best games you can only play on the Nintendo Switch. They look great on the Switch’s small screen, but when you play them on a bigger screen, they really stand out. The dock that comes with the console is nice because it has an HDMI port that lets you connect the Switch to other screens.

You may already know that it’s easy to plug in an HDMI cable and play on a TV or monitor. But it’s a different story when you use the screen of a laptop as a monitor. You can play Switch games on your laptop in a few different ways. This guide will show you how to use a laptop as a screen for Switch.

Plug it into an HDMI port

Some gaming laptops have ports for both putting and taking out HDMI signals. Others only have one HDMI port that can be used to send and receive. With an input port, you can connect a device like a Nintendo Switch to your laptop’s screen and use it like any other display. Some Alienware laptops have HDMI input ports because Dell, who owns Alienware, thinks that their displays are so good that gaming consoles or even gaming computers should be able to use them in addition to the laptop’s hardware.

Most laptops only have an HDMI output port, which is a shame. On the other hand, an output port can only send data. In other words, you can only connect it to other external displays through the HDMI port. This is great because it lets you watch movies on your laptop on much bigger screens or connect a second monitor to work faster, which is especially helpful in these COVID times.

You can find out if your laptop has an HDMI input port by looking at the user manual or by going to the manufacturer’s website and looking up your laptop model. If you’re lucky enough to have an HDMI port, it’s easy and quick to set up.

Here’s what you need to do:

Shut down all of your laptop’s programs and turn off your Switch.

The Switch should be in the dock.

Plug one end of an HDMI cable into the dock.

Connect the other end of the cable to the HDMI port on the laptop.

When you turn on the Switch, it should work right away.

If it doesn’t work right away, you might have to restart both devices while they are still linked. You can also turn them both off and then try to connect them. If that doesn’t work either, you might need to check the settings for your laptop’s display in Windows. Also, check again to see if the cables are plugged in the wrong way. Because the laptop is already using the display, the HDMI input port on the laptop can sometimes be glitchy.

If the audio signal doesn’t work, you can check the Windows audio settings to see if it has been turned off. Just turn on the HDMI signal as a sound device again, and it should work.

This method won’t be the most popular because most laptops don’t have HDMI input ports. Still, it is the best way to do it because it is easy, convenient, and works very well. Since you are connecting the two devices directly, the signal will be strong and the picture will be very clear. If you can’t use this method, you might want to try the next one.

Get a capture card

A capture card is basically an HDMI-to-USB adapter that lets you use any HDMI input device with anything that has a USB port. This means you can use your Nintendo Switch by connecting it to a USB port on your laptop and using it that way. At first, capture cards were meant to be used with cameras and other hardware that could record video. Still, you can use it with no problems on your Switch as well.

Elgato makes capture cards for gamers that are sold because they have their own software for capturing games. But you can do the same thing with any other capture card. Remember that any kind of adapter, including capture cards, will cause a delay between the input and the output. If that bothers you a lot, then playing games on the Switch’s screen will be more fun.

But if you want to have fun with friends or by yourself on a bigger screen, the capture card method is pretty much your only choice.

Here’s how to connect any capture card to your laptop and your Switch:

Shut down all of your laptop’s programs and turn off the Switch.

Put the Switch in its charging station.

Both the dock and the capture card need to be connected to the HDMI cable.

Next, connect the capture card to your laptop and turn on the Switch.

You should be able to see it work right away through the software for the capture card. If you don’t have OBS Studio, you can download and install it, then add the Switch as a new scene.

Once you are done, it is easy to play the games. Don’t touch the laptop’s keyboard, or you might lose the full-screen mode and the laptop will stop working.

In addition to input lag, another problem with capture cards is that they can be pretty expensive. It’s not a big deal if you already have one or can borrow one from a family member or friend. But it’s not a good idea to get one just to play games on your laptop’s screen, since you can easily get a TV that will look much better. Not to mention that a TV screen is much bigger than a laptop screen, making it easier to relax and play games on a TV than on a laptop.

Use the computer to play

Even though you already have a Switch and just want to use your laptop as a monitor, this isn’t the best way to do it, but it is still possible. You can download and play many Switch games on your laptop as well, but if you want to play paid games, you will have to buy them again. And you won’t be able to play exclusive games, which are the main reason people buy a Nintendo Switch.

You could also use an emulator, but they have a lot of bugs and take a long time to work. Not only that, but they need very strong hardware. Also, you can’t legally get ROMs that are protected by copy rights when you use an emulator.

Still, if you want to play Nintendo Switch games on your laptop and don’t have an HDMI input port or a capture card, this is the next best thing.

Do Capture Cards Generally Pay Off?

You might wonder what capture cards are and why they cost so much to begin with. There are a lot of things, like research and development, licensing fees, and hardware, that make capture cards so expensive. Still, people who want to use HDMI devices with their computers should buy them. Since HDMI has been a standard for a long time, it’s likely that it will still be widely used for many years to come.

Almost everyone works or goes to school from home through Google Meet, Zoom, Skype, and other platforms, so it’s very important to have a good web camera. If you have a DSLR that you never use, a capture card would turn it into the best webcam in the world in no time. So why not just get a capture card for that and play Switch games on your laptop as a bonus?


You can use a laptop as a screen for your Nintendo Switch. If your laptop has an HDMI input port, it’s also easy to set up. Since most laptops don’t have an HDMI input port, but only an HDMI output port, most people will probably find it easier to use a high-quality capture card. A capture card will change the HDMI cable into a USB cable so that you can use the USB port on your laptop.

Even though capture cards are great, they cause a lot of input lag. Some capture cards for gamers promise a low input lag, but they are also pretty expensive. If you don’t already have one or plan to get one for your camera, it’s not worth it to buy one just to play Switch games on your laptop because they are very expensive.

The last way is to just play games on your computer that you would normally play on the Switch. This is not good, especially if you want to play paid games, because you will have to buy them again. But some free games keep track of your progress on all of your devices, so you won’t lose anything.




To prevent remaining grit from clinging to the grill, Traeger grill cleaning should be done after each usage. Cleaning your Traeger grill isn’t difficult if you do it correctly from the start. Fortunately, you can use this page as a guide to ensure that your Traeger grill is always in good working order and ready for your next cookout.


First and foremost, make sure the grill is entirely cool before cleaning it; do not proceed with the next steps until the grill is absolutely cold.


Begin by cleaning your grill with a vacuum. I like to wear gloves during the whole procedure. Disposable gloves, such as those sold at Costco, or reusable dish gloves are also acceptable options. I have a pair of affordable reusable dish gloves that I use particularly for cleaning the grill.


If your grill grates are particularly filthy and caked with food, I recommend bringing them into the kitchen and washing them with warm soapy water.

If your grill grates are porcelain, like mine, you’ll want to use a sponge and nylon scrub instead of anything abrasive to prevent ruining the porcelain layer.

Despite their oily and dirty appearance, the grates clean off easily with warm soapy water. We prefer to clean our Traeger grills using Dawn Soap, which I find to be quite effective.


Replace the foil with new heavy-duty aluminum foil. Costco has a heavy-duty extra-large size that seems to suit the drip tray wonderfully!

Use the standard sort if you don’t have the heavy-duty kind. You may use the usual thickness foil to double up on the foil if you’d like, but it’s not necessary; just make sure to cover everything!

This is the stage you DO NOT want to skip… LOL


The heat baffle is located just under the drip tray and is responsible for covering the hot pot and dispersing the flame.

The hot pot is where the pellets fall and ignite for your flame, if you don’t know what I’m talking about. When you remove the heat baffle from your Traeger grill, you’ll see the hot pot, which is likely to contain fine dust as well as dust particles from the surrounding area.

What you’ll see isn’t ash; rather, it resembles sawdust from a table saw, although it’s deeper in color. Get your shop vac or garage vac out of the garage.

If you can prevent it, I wouldn’t recommend using your usual home one. Not because the grill dust will damage your vacuum, but because you don’t want any grease residue on your wonderful home vacuum. If you have a shop vac, use it.

Vacuum the interior base of the barrel as well as the little area within the hot pot. It’s OK if you vacuum up a few wood pellets; when you turn your grill back on, more will fall.


Let’s get started with the grease bucket. This should be a breeze, particularly if you use a grease bucket liner like the one shown in the picture.

Another option is to line your bucket with aluminum foil instead of using a grease bucket liner. However, using aluminum foil isn’t the cleanest or most convenient option, since if there’s a little hole or a tear in your liner, grease might seep through and end up in your bucket.

As a result, I recommend utilizing the grease bucket liners, which make grease disposal a breeze. Simply shut the four tabs and dump.


It’s now time to reassemble everything in the following order: 1) a heat baffle, 2) a foil-covered drip tray, 3) grill grates, and 4) a grease bucket coated with paper towels.

Please see more information in here.

How to know if headphones have good bass

Do you prefer average or deep bass?

I’m sure you didn’t realize there were different degrees of bass, but there are.

Later on, you’ll learn that sensitivity and impedance are significant factors in deciding how much bass your headphones or earbuds have.

Let’s look at how to tell the difference between deep bass and “conventional” bass before deciding whether a pair of headphones has good or awful bass.

The audio frequency range between 16 and 60Hz is referred to as deep bass.

A sub woofer and an AV receiver or any alternate source component are frequently required to achieve deep bass.

The sort of bass most typically associated with home theater systems and other extremely loud audio equipment is deep bass.

What is the lowest frequency (Hz) at which you can hear bass?

As previously stated, deep bass ranges from 16 to 60 Hz.

Not only can you hear, but you can also feel the bass at this frequency.

The frequency range of normal or traditional bass (or plain bass) is 60 to 250 Hz.

The bass signals in most music tracks range from 90 to 200Hz.

The frequencies around 250 Hz can give warmth to the bass without sacrificing definition.


Sensitivity is one of the specifications that will determine the amount of bass produced by your headphones.

Although it is uncommon to hear people discuss bass and sensitivity, it is an important factor in determining bass performance.

Decibels, or DB for short, are used to assess a set of headphones‘ sensitivity.

To cut a long tale short, the amount of sensitivity and the extent to which your headphones blast out that strong bass have a direct relationship.

The higher the sensitivity (measured in decibels) of headphones, the louder they will be and the more bass they will exaggerate.

Let’s take a closer look at this concept.

When the normal person can’t hear the music or wants to hear the bass from, say, Dr. Dre’s Still Dre, they increase the level, which is natural.

You won’t have to turn up the volume as much if you use a more sensitive pair of headphones.

More sensitive headphones also have other advantages, such as being safer for your ears, as loud sounds can harm your hearing, and consuming less power with greater sensitivity.

Sensitivity, on a more technical level, relates to the loudness of a pair of cans (headphones) at a certain level of power.

When two headphones are compared side by side, the one with higher sensitivity at power level x will be louder.

Have you ever puzzled why the little headphones you buy at Wal-Mart can’t compete with the likes of Sony and Bose, even if you’re listening to music on your laptop with both of them?

One of the reasons for this is because of this. In decibels, the range from soft to loud is between 80 and 120, with 80 being very quiet and 120 being very loud.


I’ll do my best to describe impedance in layman’s terms. Impedance is a difficult scientific phrase that is often accompanied with a complex formula.

Let’s start with a basic explanation of what high and low impedance means and why it matters when it comes to headphones.

When a headphone’s impedance is set to low, it signifies that less power is required to achieve a certain level of audio.

Low Independence earbuds will allow you to get a reasonable quantity of audio from low frequency amplifiers such as cell phones.

This is usually the case with headphones that have an impedance of around 24 ohms (the unit of measurement of Impedance).

When we get to impedance levels of 24 ohms and higher, we can only attain greater audio levels with amplifiers that have a lot of power.

As a result, any potential damage from overloading is avoided. Higher impedance headphones can be used with a variety of different devices.

Many feel that because it is one of the most essential concepts in the headphone ecosystem, it should come first in any discussion or evaluation of headphones.

One of the most essential characteristics of the headphone’s impedance is that it tells us how many and what kind of devices can be utilized to play music.

So, even if you increase the volume on your headphones up tremendously, the music will be rather weak with low impedance headphones.

If you want to utilize your 36 ohm headphones but all of your music is on your smartphone, the best thing you can do is get an amplifier, which may fix the problem.

But, of course, one may ask, why would I buy a high impedance set of cans in the first place?

Second, lugging a smartphone, headphones, and an amp around can be exhausting.

The ability to make detailed sound is the answer. As a result, they can be costly, but they are well worth the investment. Here are some examples of headphones with a greater impedance.


The driver in a headphone converts electrical signals into sound. In most cases, drivers are measured in millimeters. The sound and the headphone driver do not necessarily have a linear relationship.

The fact that headphones are often further from the ear drum and the earphone is generally in the ear phone is one reason for larger drivers in headphones.

(In this context, by headphone, I mean over-ear headphones, and by earphone, I mean in-ear headphones, however the two terms are used interchangeably throughout this article.)

Although, on average, larger drivers produce more output.

The drivers will come in a variety of sizes, ranging from 8mm to 50mm.

Will you be able to boost the bass of your headphones now that you know what a headphone driver is? Well, that will be determined by the type of driver used in the headphones.

Moving-coil driver, Electrostatic, Electret, Planar Magnetic, Balanced armature, and a Precide driver are the various types of drivers.

The following link provides more information on various driver types.

For the objectives of this article, dynamic drivers will be discussed. When it comes to headphones, especially over-ear models, manufacturers often boast about 40mm dynamic drivers.

Large diaphragms are used by dynamic drives. Dynamic drivers can produce powerful bass without consuming a lot of power, while yet generating the required amount of pressure.

Yes, a huge dynamic driver can affect the bass, but this isn’t always the case.

Dual Drivers are a type of driver found in some headphones.


What is the difference between dual driver and single driver headphones?

Dual driver earphones/headphones are essentially headphones with two drivers or two speakers in each earpiece.

The midrange and high frequencies are handled by one pair of speakers, while the bass is handled by the other. This results in a richer, more detailed sound, which improves the sound quality of music.

The DJ’s favorite set of headphones, dual driver headphones, provide LESS DISTORTION and MORE EFFICIENCY.

Examine and compare various types of headphones/earbuds

The first thing you should do is try on as many different headphones as possible. Make sure you test each pair of headphones with the same song.

You’ll be able to tell which headphones have the loudest bass this way. You must compare the headphones to something in order to assess how loud the bass is.

A sound system is the next best thing to compare them to. However, keep in mind that your headphones will be right up to your ear, and if they are excessively loud, they may cause ear damage.

Go online and read as many reviews as you believe are required. On most online makers’ websites, users discuss not just the performance of the headphones, but also what else they can be used for.

In addition to the feedback from the manufacturers, For additional information, read the Amazon product reviews.

If your budget allows, go with the bigger, more well-known brands. The reason for this is that they invest heavily in R&D and design, ensuring that you receive a high-quality product.

Second, the manufacturer is unlikely to oversell the capabilities of the headphones in order to protect their brand.

Despite the fact that they are expensive, the sound quality is often excellent.

What are the greatest bass earbuds?

The foregoing discussion has mostly revolved around over-ear or on-ear headphones. However, I feel it is critical to address the issue of earphones.

Ear buds can be any of a number of distinct types of headphones. This includes everything from white Apple earbuds that rest on the outside ear canal and dangle down the ear to in ear monitors (IEM) that go directly into the ear and can be connected or wireless.

I’ve gone into great detail on dynamic driver headphones. Many in-ear monitors also have dynamic drivers.

In comparison to in-ear monitors with balanced armature drivers, these have a richer and deeper bass tone.

Please see the debate on drivers above. If in-ear monitor earbuds are your thing, here’s a selection of headphones that contain some high-quality in-ear monitors that you can use to get some good bass.

Make use of the Bass Boost feature.

The overall level of bass in your headphones will now be limited by the device you’re using and the headphones you’re using.

I recently acquired a reasonably priced pair of headphones that promised a lot of bass.

However, as soon as I put them on, I discovered that the bass was underwhelming, at least in comparison to what the maker had promised.

Certain headphone manufacturers have made bass optimizations to their products. The majority of consumers associate bass with Beats headphones.

In short, the following post demonstrates the best techniques to raise the headphones on your speakers, and you can.

  1. Increase the bass of your headphones on Windows.

2.On a Mac, increase the bass of your headphones.

  1. Purchase an amplifier
  2. Invest in a good pair of bass-enhanced headphones.
  3. Enhance the bass of your Android headphones

What are the best headphones for bass?

Here’s a list of the top three headphones with the most bass, in my opinion. I believe you will be blown away.

Best Bass Headphones: SkullCandy Crusher

The 40mm dynamic drivers and extra sub woofer speakers that produce rich quality bass and an immersive audio experience are the secret to the scull candy crusher headphones’ bass performance.

There are numerous bass levels to choose from, allowing you to choose the ideal bass level.

The Skull Candy Crusher headphones are complete Bluetooth headphones with a battery life of 40 hours and only 2.5 hours of charging time.

In addition, the Skull Candy Crusher headphones have a quick charging technology that provides 3 hours of use after only 10 minutes of charging.

Memory foam ear cups and superior noise isolation are also included in the headphones.

Sony XM3 1000

The greatest headphones on the market, in my opinion. This is from the perspective of having superb bass and overall sound quality.

The Sony WH1000 XM3 headphones are the next step up from the Sony WH1000-XM2.

Along with the original Bose QC35 II, the XM2s were the flagship over-ear wireless Bluetooth active noise canceling headphones in my opinion.

For a more in-depth look at the Sony 1000XM3, go here. Click on the following link to learn more.

Wireless Beats Studio 3 headphones

Despite the debate surrounding beats, they are known for their bass. The studio 3 wireless headphones aren’t known for their overall quality, but when it comes to headphones with the best bass, they undoubtedly win.

What factors should I consider when purchasing a headset?

Try them out.

You may read all the reviews you want, but at the end of the day, the only way to know if a pair of headphones is to try them on.

Feel the headphones from the ear pads to the slider, and listen to different tunes to see how they sound.

Is it more important to you to have noise cancellation or noise isolation?

When you want to block out the outside world and be completely engaged in your music, noise cancellation or isolation is the way to go.

Cancellation is far superior to isolation, but it comes at a significant cost. These are particularly beneficial when you need to focus at work or when you don’t want to hear city traffic or other passengers on public transportation during your morning commute.

More information on noise cancelling headphones may be found here.

Are you planning on using them in the gym?

Headphones are versatile and dynamic these days, as they may be utilized for a variety of purposes.

Even in the gym, you may want to concentrate entirely on your workout without listening to what others are saying.

Sometimes all you need is a little music or motivation in your ear to get you going.

You might even wish to go for a swim now and then, and headphones are an excellent underwater companion.

Choose whether or not you wish to utilize them for gaming.

If you want to use your headphones to play games, there are a few things you should keep in mind:

Choose the platform on which you’ll be utilizing the headphones.

Are they going to be wired or wireless?

What level of comfort are you looking for? (Think material, headband, ear pads and ear cups)

What kind of sound do you wish to hear? (stereo, virtual, dimensional)

Do you require them to sleep?

This isn’t a mistake. Headphones can even assist you in falling asleep. A restless mind sometimes needs to be diverted by something soothing.

Sleeping earphones come very handy in this situation. Some of them can even be used as gym headphones.

Melatonin can be induced by listening to soothing music or binural rhythms.

As a result, you will be able to receive the sleep that you not only require but also deserve.

What kind of headphones are you looking for?

Whatever you want to call them, headphones/earbuds/earphones come in a variety of shapes and sizes.

Previously, headphones were worn over the ear and at the top of the skull, whereas earphones were worn just in the ear.

You can now choose from in-ear, on-ear, over-ear, wireless, wired, truly wireless, and many other options.

Determine whether or not you require Bluetooth.

Bluetooth is built into most quality headphones. However, there are moments when all you want to do is listen to music and watch the world go by.

The key difference is that with Bluetooth headphones, you can listen to your music without having to use wires, and you can usually connect to several devices.

Non-Bluetooth headphones, on the other hand, are usually wired and can only be connected to one device at a time.

Can You Play Electric Guitar With Headphones?

Electric guitars are beloved and popular musical instruments, but they can be very loud, and not everyone wants to hear them played. Can an electric guitar be played and heard with headphones?

A guitarist can play and listen to an electric guitar while wearing headphones. A headphone adaptor can be plugged into the output jack to hear the electric guitar being played. Headphones can also be connected to an amp.

Now that you know how to directly plug headphones into an electric guitar, you may be wondering how else you can listen to your guitar while playing.

Headphone Adapter

Plug a headphone adaptor into the output jack and then your headphones into the adaptor. According to a Mike’s Music Shop employee, this is one of the easiest ways to listen to your electric guitar while playing.

Before you buy an electric guitar headphone adaptor, make sure it works with your guitar. Before buying a headphone adaptor, check which electric guitars it is meant to work with.


An Amp for Headphones

You can listen to your electric guitar playing through headphones by connecting them to your amp. Most amps won’t let you directly plug in your headphones, so you’ll need a headphone adapter to use the headphone jack. An electric guitar headphone jack may work with your amp, so you don’t need to buy a new headphone adaptor.

If you buy an amp headphone adaptor, make sure it works with electric guitar amps. You may also need to extend your headphones’ cords so you can stand up and play your guitar through the amp. Watch out for the cords when playing your electric guitar and listening through your amp-connected headphones!

Mobile Amps

If you have a small portable amp and prefer to listen to your electric guitar through headphones rather than the amp, you can do so. Many portable amps allow you to use your headphones without a headphone adaptor. This eliminates the need to carry around a headphone adaptor.

Portable amps are great for traveling. If you’re on the road and don’t want to bother anyone, you can use your portable amp to listen to music through your headphones.

Antenna Amp

It’s possible to play your electric guitar and listen to it through headphones without carrying around a large or portable amp. Plug your headphones into the amp after your electric guitar.

The headphone amp is essentially a headphone adaptor for your electric guitar, but the sound quality is better because it comes from an amplifier rather than the guitar itself.

Bluetooth Amplifiers

If you want to use Bluetooth headphones while playing electric guitar, you should get an amp that allows you to connect Bluetooth devices. Then you can listen to your music without having to worry about tripping over your headphones’ cords.

Make sure an amp can connect to Bluetooth devices before buying one. Because Bluetooth is a newer technology, not all amps will have it. Bluetooth-enabled amplifiers are becoming more common, but not universal.

The Benefits of Using Headphones While Playing Electric Guitar

Wearing headphones while playing electric guitar has many advantages.

Electric guitars are loud, and many people enjoy loud music, especially when they make and play it. Nobody likes noise, and some people want peace and quiet, which they can’t get if their neighbor is playing their electric guitar loudly. People may also be trying to sleep, which is impossible if their neighbors are playing an instrument loudly.

With headphones on, only you can hear what you’re playing on your electric guitar, so you won’t bother your neighbors. So they can sleep and relax, while you can blast your music as loud as you want.

When playing electric guitar with headphones, you can hear the music much better than when not wearing them. The sound quality will vary depending on your headphones, so if you want to hear what you’re playing on your electric guitar, get high-quality ones.

Electric guitars are great, and it’s nice to be able to hear yourself play. Now that you know how to do it, have fun with your electric guitar!

Can Wearing Headphones cause Hair Loss?

Headphones are useful for music, gaming, and video privacy. Too much use of headphones may cause hair damage and loss.

Casually wearing headphones or a headset will not cause serious hair damage. However, daily use of a headset can cause traction alopecia, or hair loss caused by constant friction or pulling on the roots.

So which headphones are dangerous? When should you be worried? How to stop hair loss? Here’s the lowdown on headphones and hair loss.

Which Headphones Are Dangerous? 

Traditional headphones can cause hair damage if used excessively. This design features a tight band around the head and two speakers over each ear. Headphones without adjustable bands are more prone to damage.

Many people choose to wear their headphone bands behind their heads or over their necks to avoid hair damage or loss, but this may not be feasible for musicians who require a tight fit.

Direct-to-ear earphones do not directly interact with hair and thus do not cause hair loss. Adjustable headphone bands also reduce hair loss and damage.

While nonadjustable headphones are more prone to damage, the chances of serious damage are low and they only pose a real risk when worn constantly.


Do My Headphones Have a Shelf Life?

The amount of time wearing headphones causes hair loss is unknown. However, daily use of headphones increases the risk of traction alopecia.

Those who play games for long periods of time with tight-fitting headsets have reported scalp irritation and hair loss due to traction alopecia.

When I asked a Reddit gaming community about their headphone usage, the majority said they use them for at least 4 hours per day. Despite wearing headphones for several hours per day, 90% of those who wore them said they had never had any problems with hair loss. So, the risk of hair loss from headphones is low enough that the casual headphone user need not be concerned.

Do I have to remove my headphones?

No, in a nutshell. As long as you don’t abuse your headphones or wear them constantly, you won’t lose hair. You can safely listen to music with headphones without worrying about balding.

Traction Alopecia

Traction Alopecia is hair loss caused by repeated hair pulling. Damaged hair from tight ponytails or buns is the most common symptom. Excessive use of headphones is another possible cause.


The first signs of traction alopecia are pimple-like red dots on the scalp. Missing and broken hairs along the scalp indicate a worsening condition. It is most common in the frontal hairline, but it can occur anywhere on the scalp.

Traction alopecia can cause:

Headache redness

Itch or stinging

Scalp scaling

Hair follicle inflammation

Swollen pus-filled scalp blisters

Traction alopecia is not a medical condition, but it can be very harmful to the hair and scalp. Consistently worn headphones can damage hair roots and cause traction alopecia. If you suffer from this condition, you should use earbuds or softer headphones.

Avoiding Traction Alopecia

Wearing earbuds instead of headphones, choosing headphones that fit looser, or wrapping the headphone band around the neck or back of the head can help prevent traction alopecia. Reduce the use of headphones in general. Wearing headphones every now and then is fine, but if they are irritating your hair and scalp, you should stop using them.

Change hairstyles to avoid tight ponytails or braids and wear your hair down to reduce traction alopecia. Reducing heat or cutting your hair shorter can help relieve scalp irritation. Avoid rigid headbands, hats, and hairpieces.

Hair loss and traction alopecia remedies

If you have traction alopecia, you should see a dermatologist right away. Dermatologists can assess the damage and prescribe relief and healing.

Among the remedies prescribed by doctors for traction alopecia are:

Antibiotics, which help prevent and treat infections.

Topical steroids for swelling and inflammation

Topical minioxidal is an over-the-counter hair growth medicine.

Antifungal shampoos for itching

Biotin supplements for hair growth.

These treatments, especially hair growth treatments, can take months to fully work. There is no immediate cure for traction alopecia, nor is there a magical hair growth pill that will instantly restore your hair. But with time and effort, your hair and scalp can recover.

After traction alopecia treatments, avoid things that can irritate your hair or scalp. Until the inflammation subsides, keep your hair down, avoid tight-fitting hats, and avoid headphones.

what size longboard should i get

what size longboard should i get

Longboards are distinct from skateboards in that they are longer.

There is more to this assertion than you might imagine.

If you’re a surfer and the waves aren’t big enough for a longboard, a skateboard might be a better option than a long board for getting around and having fun when the weather is bad or the waves aren’t high enough for a longboard.

Skateboards, on the other hand, are more maneuverable but less stable, while longboards are less maneuverable but more stable.

Generally speaking, longboards are a subtype of skateboards, with the most noticeable distinction being not the size, but rather the construction of the board itself.

Skateboards are typically 30 inches long and 7 inches wide, however

can range in length from 22 to 45 inches and 9 inches wide on average.


How to Choose the Right Longboard Size

Even if this is your first longboard purchase, there are some considerations to keep in mind: length, breadth, flexibility, style, shape and a few more.

Obviously, all of this is dependent on your intended purpose for the board.

While skateboards are mostly utilized for trick and turn-based riding, longboards can be used for everything from getting around town to cruising the hills and even doing tricks.

Basically, there are four sorts of longboards: cruising (or carving), downhill, freeride, and freestyle, all based on the type of longboarding they are used for (although this is roughly speaking, and some longboarders may argue for a different division).

First, let’s take a closer look at the decks’ specifications and how they impact the board’s performance.

The rule of thumb is that the longer a board is, the more stable it is.

To reverse this, the board gets less stable as it gets shorter, but it also becomes more nimble, allowing you to cut streets and turn corners with more ease.

As far as deck measurements go, the more sturdy the board, in general, the larger it is in width.

Longboards come in many shapes and sizes, ranging from 7 inches wide (like a skateboard) to 9 inches wide (like a surfboard). This makes sense given that longboards can range in length from 22 to 45+ inches.

The board’s flex, or ability to absorb shocks and produce a springy feel as you ride it, is also something to keep in mind when choosing a longboard. This gives you more energy for pushes and carves.

Obviously, the board’s overall stability will be affected by the amount of flex in the board.

As a general rule, you can choose between a “soft,” “medium,” or “stiff” longboard, based on your personal preference.

You should also think about the style you prefer, which means how low you want the deck to be.

Choose between top-mount (drop through), drop-through (drop deck) or double-drop. The order in which they are listed indicates the level of stability each design provides.

The less energy you have to use pushing or breaking when the descent is lower.

Top-mount and drop-through are two different styles of mounting trucks on a skateboard, as you may have guessed.

If you’ve ever seen a drop deck, you’ll know what a double drop is.

It’s not the only thing to consider; it’s not the most important.

What you can and can’t do with your board will be affected by this, and there are two options: symmetrical or directional.

Those who prefer carving, cruising, and downhill longboarding should go with the first type, but those who prefer freeriding and freestyle longboarding should go with the second (also known as a twin board).

Perhaps the most important consideration is whether the board has a kick tail (nice for tricks, but not essential) or what type of indent it has (the latter is more important) (enhances the grip your feet have on the board).






The technique of “pushing mongo” involves using only one foot to propel the skateboard forward while keeping the other foot close to the tail.

When it comes to riding, comfort is more important than anything else, so it’s not a terrible habit at all.

Mongo pushes need a longer reentry into the game as compared to other types of moves.

Because the skateboard’s center of gravity is less stable, this might lead to a loss of balance.

Proper pushing involves placing your front meal over your front truck and pushing forward with your rear foot.

Nevertheless, for humans, the situation is somewhat different.

Toes and ankles are kept to a reasonable distance from one other.

Despite the fact that the origin of the term “mongo” is a mystery, you don’t need any wild imagination to get the sense of what it means.

Why Is It Called Mongo Pushing?

A slang phrase for “big” or “very large” is mongo.

The term “mong” or “mongo” can also be used as a derogatory term for someone who is stupid in an unrelated context.

Items retrieved from garbage cans are referred to as “mongo” in New York.

The word mongo has a variety of meanings, so we can at least get a sense of where the name comes from.

Another theory holds that the term “Mongol” was coined as a slur for mongoose riders.


Why Is Pushing Your Skateboard Mongo Bad? 

There are a few reasons that make it more difficult to push mongo, not just because it looks ugly.

To begin with, getting situated on the board is more time consuming.

As compared to a normal posture, your feet and body move a lot more frequently.

Secondly, because your weight is on the back of the skateboard, you are less stable and more prone to falling over.

Pushing in the regular position isn’t difficult, but patience and persistence are required.

Pushing in a normal stance has some advantages, but you don’t need to learn any more techniques.

Let us examine the advantages and disadvantages of promoting Mongo.

The Advantages of Pushing Mongo

Despite the fact that mongo skaters have an easier time learning to ride fakie, the practice is nonetheless frowned upon.

Mongo’s rider merely needs to place one foot near the truck bolts and one foot on the tail of the board to get going.

You’re now able to ride fakie as a result of this procedure.

Learning to ride switch is easier with the help of Mongo.

Mongo is already being pushed by your front foot if you’re pushing on it.

All that’s left is for you to move your back foot closer to the center of the board and your front foot near the tail.

It will take some time to get used to the new sensation of turning, but as the saying goes, “practice makes perfect.”

Let’s now discuss the drawbacks.

Advantages are by and away outnumbered by disadvantages.

The Disadvantages Of Pushing Mongo

Pushing mongo has a number of less noticeable drawbacks, but one that stands out.

Pushing data out of MongoDB is inefficient.

Now that it’s been said, let’s move on to the other drawbacks.

Mongo is tough to ollie, hop over small pebbles, and rapidly avoid obstacles because your foot is on the tail of the board.

You can accomplish all of the aforementioned tasks more quickly if you have a suitable stance.

Simply remove your back foot from the board and place it on the tail.

Some people say that using Mongo can be unsafe because of the additional procedures it necessitates.

When it takes longer to get into a steady and suitable stance, unforeseen occurrences and impediments can’t be dealt with swiftly.

We can’t deny it.

Injuries and wipeouts can occur because you’ll have less time to react.

Weight distribution and gravity are two other drawbacks that go unmentioned.

Your dominant foot (the one at the back of the board if you push mongo) rests between the centre of the board and the tail, causing the ride to be unsteady.

The problem becomes more evident at higher speeds, and correcting it becomes more difficult.

When you press regularly, none of these problems arise.

Balance and stability are enhanced when your front foot is positioned close to the bolts on top of the front trucks.